Hendi Blue Serie Mode D'emploi page 6

1) Reset overload circuit breaker
• Allow the deep fryer to cool down.
• Remove the element holder from the support.
• Unscrew the black protective cap from the bottom
of the element holder.
Warranty
Any defect affecting the functionality of the appli-
ance that becomes apparent within one year after
purchase will be corrected by free repair or replace-
ment provided the appliance has been used and
maintained in accordance with the instructions and
has not been abused or misused in any way. Your
statutory rights are not affected. If the appliance is
claimed under warranty, state where and when it
Discarding & Environment
At the end of the life of the appliance, please dispose
of the appliance according to the regulations and
guidelines applicable at the time.
EN
6
• Press the "reset button" of the overload circuit
breaker. You should hear a clear click.
• Screw the black protective cap back on
• Reinstall the element holder on the support.
was bought and include proof of purchase (f.e. re-
ceipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.