Bond HYFP50095-130 Guide D'utilisation page 4

SAFETY INFORMATION
• Inspect the burner before each use of this fire table. If there is evidence of damage, the burner
must be replaced prior to use of this fire table.
• Inspect the hose before each use of this fire table. If the hose shows signs of cracks, abrasion,
cuts or damage, do not use this fire table. Fix the hose as required before using appliace.
• Remove the hose out of pathways where it may be tripped over or subject to accidental damage.
• Children and adults should be alerted to the hazards of high surfact temperatures and
should stay away to avoid burns or clothing ignition.
• Young children should be carefully supervised when they are in the area of this appliance.
• The LP gas supply tank must be constructed and marked in accordance with the specifications for
LP gas tanks of the U.S. Department of Transportation (DOT) or the National Standard of Canada
CAN/CSA-B339, LP gas tanks, spheres and tubes for the Transportation of Dangerous Goods;
and Commission.
• The LP gas tank must have a listed overfilling prevention device (OPD) and a QCCI or Type I,
(CGA810) LP gas tank connection.
Caution:
Only use the pressure regulator and hose assembly supplied with this fire table. Replacment
pressure regulator and hose assemblies must be specified or supplied by BOND MANU-
FACTURING CO.
Inspect the burner before each use of the appliance. If the burner shows signs of damage of
any kind, do not operate the appliance. Fix or replace the burner as required before using the
appliance. For assistance with repair or replacement of the burner, call Bond Manufacturing
at 1-866-771-2663. Use only replacement parts from the manufacturer.
Caution: This heating item should not be used on plastic composite or artifcial wood decks.
4