System Layout; Technical Data - RIB PRESIDENT P1 24V-CRX Manuel

SYSTEM LAYOUT

PRESIDENT TECHNICAL FEATURES
Family of non reversible actuators to be used for operation of rods 3 or 4 m lenght.
Supplied complete with foundation plate, electronic control unit, pre-set balancing springs, Encoder for
obstacle detection and telescopic rod 3 or 4 m long.
Installation design will comply with the specifications and rules in force.
ELECTRIC SECURITIES
In the PRESIDENT the motor and the encoder are already connected to the incorporated control
electronic board.
You just need to connect the wires of a keyboard and, of course, of the feeding tension. For the
connections and the technical data of the fixtures follow the relevant handbooks.

TECHNICAL DATA

Max. boom lenght
Opening time
Power supply
Capacity
Power absorbed
Power supply
Capacity
Power absorbed
Max. torque
Normative cycles
Daily cycles suggested
Service
Consecutive cycles guaranteed
Actuator weight
Operating Temperature
Protection grade
PRESIDENT
m 3 4
s 3 3,5
230V~ 50/60Hz
W 74
A 0,32
120V~ 60Hz
W 72
A 0,6
Nm 100 130
n° ∞ - 3s/2s
n° 600
% 100
n° 600 400
kg 40
°C -10 ÷ +55 °C
IP 44
THIS OPERATOR IS DESIGNED FOR THE VEHICLES ACCESS CONTROL AND NOT FOR
PEDESTRIANS.
Therefore, we higly recommend the use of safety devices and that of one or
more warning plates, art. ACG9642 to prevent the pedestrians interfering with
the operator.
27
PRESIDENT barrier
Photoelectric cells
Photoelectric cell rack column
Magnetic sensor
G
B