Change The Connection Method; Change From A Usb Connection - HP Officejet 6000 Serie Guide De Mise En Route

5. Make sure the wireless version of the
HP Officejet/Officejet Pro device is
set as the default printer driver
(Windows only)
If you install the software again, the installer might
create a second version of the printer driver in your
Printers or Printers and Faxes folder. If you have
difficulties printing or connecting to the HP device,
make sure the correct version of the printer driver is
set as the default.
1. Click Start, point to Settings, and then click Printers
or Printers and Faxes.
- Or -
Click Start, click Control Panel, and then double-click
Printers.
2. Determine if the version of the printer driver in the
Printers or Printers and Faxes folder is connected
wirelessly:
a. Right-click the printer icon, and then click
Properties, Document Defaults, or Printing
Preferences.
b. On the Ports tab, look for a port in the list with a
checkmark. The version of the printer driver that
is connected wirelessly has Standard TCP/IP Port
as the Port description, next to the checkmark.
3. Right-click the printer icon for the version of the
printer driver that is connected wirelessly and select
Set as Default Printer.

Change the connection method

If you have installed the software and connected your HP Officejet/Officejet Pro device using a USB or Ethernet
cable, you can change to a wireless connection any time you want.

Change from a USB connection

Use the following instructions to change from a USB to a
wireless connection.
Windows
1. On the Windows taskbar, click Start,
select Programs or All Programs, select HP,
select the folder for the device, and then select
Reconfigure Wireless Settings.
2. Follow the onscreen instructions and remove the USB
wireless setup cable when prompted.
10 Change the connection method
NOTE: If there is more than one icon in the folder for
the HP device, right-click the printer icon for the version
of the printer driver that is connected wirelessly and
select Set as Default Printer.
6. Make sure the HP Network Devices
Support service is running
(Windows only)
To restart the HP Network Device Support service
1. Delete any print jobs currently in the print queue.
2. On the desktop, right-click My Computer or
Computer, and then click Manage.
3. Double-click Services and Applications, and then
click Services.
4. Scroll down the list of services, right click
HP Network Devices Support, and then click Restart.
5. After the service restarts, try using the HP device over
the network again.
If you are able to use the HP device over the network,
your network setup was successful.
If you still cannot use the HP device over the network or
if you have to periodically perform this step in order to
use your device over the network, your firewall might be
interfering. For more information see "Configure your
firewall to work with HP devices" on page 12.
If this still does not work, there might be a problem with
your network configuration or router. Contact the person
who set up your network or the router manufacturer for
help.
Mac OS
1. Click the HP Device Manager icon on the Dock or in
the Hewlett Packard folder in the Applications folder.
2. From the Information and Settings list,
select Network Printer Setup Utility.
3. Follow the onscreen instructions to configure the
network settings.