For Your Safety - Kettler Ergometer PX 1 Instructions De Montage

Assembly Instructions
GB
Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important
information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a
safe place for maintenance purposes or for ordering spare parts.

For Your Safety

I Exercise should be used only for its intended purpose, i.e.
for physical exercise by adult persons.
I Any other use of the equipment is prohibited and may be
dangerous. The manufacturer cannot be held liable for dam-
age or injury caused by improper use of the equipment.
I Exercise has been designed in accordance with the latest stan-
dards of safety. Any features which may have been a possible
cause of injury have been avoided or made as safe as possible.
I Incorrect repairs and structural modifications (e.g. removal or re-
placement of original parts) may endanger the safety of the user.
I Damaged components may endanger your safety or reduce
the lifetime of the equipment. For this reason, worn or dam-
aged parts should be replaced immediately and the equip-
ment taken out of use until this has been done. Use only orig-
inal KETTLER spare parts.
I If the equipment is in regular use, check all its components
thoroughly every 1 -2 months. Pay particular attention to the
tightness of bolts and nuts.This applies especially to the se-
curing bolts for saddle and handelbars.
I To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.
I Instruct persons using the equipment (in particular children)
on possible sources of danger during exercising.
I The unit requires a power supply of 220-230 V/50 Hz. It
should be connected only to a safety socket with a single 10-
A fuse. Before commissioning the appliance pay attention to
the fact that the correct plug-in power supply unit (observe
marking) has been connected properly.
I Important: Do not under any circumstances carry out electri-
cal repairs or alterations yourself. Always ensure that such
work is done by a properly qualified electrician.
I mportant: disconnect the apparatus from the mains before
doing repair, maintenance or cleaning work.
Handling the equipment
I Before using the equipment for exercise, check carefully to
ensure that it has been correctly assembled.
I It is not recommended to use or store the apparatus in a
damp room as this may cause it to rust. Please ensure that no
part of the machine comes in contact with liquids (drinks, per-
spiration etc.). This may cause corrosion.
I The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
4
I Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the
VDE regulations.
I When the unit is not in use, unplug it from the power supply.
I Ensure that the power cable is not pinched and that no-one
can trip over it.
I All electric appliances emit electromagnetic radiation when
in operation. Please do not leave especially radiation-inten-
sive appliances (e.g. mobile telephones) directly next to the
cockpit or the electronic controlsystem as otherwise values
displayed might be distorted (e.g. pulse measurement).
I Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
I Any interference with parts of the product that are not de-
scribed within the manual may cause damage, or endanger
the person using this machine. Extensive repairs must only be
carried out by KETTLER service staff or qualified personnel
trained by KETTLER.
I Always observe the general safety rules and precautions for
working with electrical equipment.
I Before beginning your program of training, study the instruc-
tions for training carefully.
I Our products are subject to a constant innovative quality assur-
ance. We reserve the right to perform technical modifications.
I In case of enquiry, please contact your KETTLER dealer.
I In choosing the location of the apparatus, ensure a sufficient
safety distance from any obstacles. The apparatus must not
be mounted in the immediate vicinity of main passageways
(paths, doorways, corridors).
I For a comfortable training position please adjust the hand-
lebar andsaddle position to your body height.
I Caution: While assembly of the product keep off children's
reach (Choking hazard - contains small parts).
I The exercise cycle complies with the DIN EN 957 - 1/5, class
SA. It is therefore suitable for therapeutic use.
I Before beginning your first training session, familiarize your-
self thoroughly with all the functions and settings of the unit.
I A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect
upon operation. Possibly occurring noise during reverse pe-
dalling result from engineering and are absolutely safe.
I The exercise cycle has a magnetic brake system.
I The equipment is independent of revolutions per minute.
I Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.