Char-Broil 17202005 Guide Du Produit page 12

Problem Possible Cause
Alarm sounding with 3 beeps every 30 seconds and will only stop when the Power Bu on is turned to off.
Blinking "Err1" appears when you press the Power Bu on when star ng your smoker.
Blinking "Err1" appears when you press the Temp Bu on on your smoker.
Err1
Blinking "Err1" appears when you press any bu ons on your smoker.
Refer to online Electrical Replacement Manual for instruc ons on removal and replacement
Alarm sounding with 3 beeps every 30 seconds and will only stop when the Power Bu on is pressed
Blinking "Err2" appears when you press the Power Bu on when star ng your smoker
Err2
Blinking "Err2" appears when you preheat your smoker
Blinking "Err3" appears when you press the Meat Probe Bu on a er star ng your smoker.
Err3
Blinking "Err3" appears when you press the Meat Probe Bu on when you want to check the food temperature.
Blinking "Err4" appears when you press the Meat Probe Bu on a er star ng your smoker.
Err4
Blinking "Err4" appears when you press the Meat Probe Bu on when you want to check the food temperature.
Remote control is
The remote control is not sync'd to the Smoker
unresponsive
Problem Possible Cause
Er ° F
or Blinking Er ° F (or Er ° C) appears in the Set Chamber Temperature bar of your remote control
Er ° C
Er ° F
or Blinking Er ° F (or Er ° C) appears in the Set Meat Probe Temp bar of your remote control
Er ° C
Troubleshooting
Error Codes
Remote Control Models 17202004 and 17202005 only
Remote Control Error Codes Models 17202004 and 17202005 only
12
Preven on/Solu on
Turn Smoker OFF and unplug from outlet
Replace Thermostat Kit
Turn Smoker OFF and unplug from outlet
Check or replace in this order
Replace Thermostat Kit
Replace Control Panel Display Kit
Replace Power Board Kit
Turn Smoker OFF and unplug from outlet
Check or replace in this order
Replace Meat Probe
Replace Meat Probe Housing
Replace Control Panel Display Kit
Turn Smoker OFF and unplug from outlet
Check or replace in this order
Replace Meat Probe
Replace Meat Probe Housing
Reset the Remote Control:
1. Main Control: press Power bu on and hold for
3 seconds un l it beeps.
2. Remote Control: Press Power bu on twice on
the remote.
The Remote control is now sync'd to the smoker.
** Indicates remote is sync'd with the smoker.
Power Bu on
Preven on/Solu on
Turn Smoker OFF and unplug from outlet
Check or replace in this order
Replace Thermostat Kit
Replace Control Panel Display Kit
Replace Power Board Kit
Turn Smoker OFF and unplug from outlet
Check or replace in this order
Replace Meat Probe
Replace Meat Probe Housing