Error Messages - Withings BPM Core Manuel D'utilisation
Masquer les pouces
Voir aussi pour BPM Core:
- Manuel d'utilisation (71 pages) ,
- Instructions d'installation et d'utilisation (53 pages) ,
- Guide utilisateur (32 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Error messages
EN
Error message
Measurement could not be performed. Please try
e
again. If the problem occurs again, please contact
customer service.
Connection error. Quit the application and
reconnect your blood pressure monitor. Connec-
tion error.
ams,
s,
Please wait until the cuff is totally deflated before
starting a new measurement. Stay still during
ly
measurement.
s
e
Causes
Hardware auto-check error
Communication error between the
blood pressure monitor and the
collateral device.
- Cuff is not deflated before measurement
- Noise interference
- Excessive user movements
Solutions
Measurement could not be performed. Please
try again. If the problem occurs again, please
contact customer service.
1. Push the blood pressure monitor button for
3 seconds to turn it off. Quit the application
and push the blood pressure monitor button
to turn it on.
2. If the problem occurs again, please contact
customer service.
1. Please wait until the cuff is totally deflated
before starting a new measurement. Stay still
during the measurement
2. If the problem occurs again, please contact
customer service.
34-35
Publicité
Table des Matières
