Error Message - Withings BP 800 Manuel D'utilisation

Error messages

Error message

Measurement could not be performed.
Please try again. If the problem occurs again, please
contact our customer service.
Unplug the Blood Pressure Monitor. Quit the applica-
tion and plug the Blood Pressure Monitor back.
Please wait until the cuff is totally deflated before
starting a new measurement. Stay still during mea-
surement.
Check that the blood pressure monitor is correctly
positioned on your arm and that measurement is
performed in good conditions.
Low battery level. Unplug the blood pressure moni-
tor. Replace the alkaline cells.
Countermeasures
1- Measurement could not be performed.
Please try again. If the problem occurs again, please
contact our customer service.
1- Unplug the blood pressure monitor. Quit the
application and plug the blood pressure moitor
back.
2- If the problem occurs again, please contact our
customer service.
1- Please wait until the cuff is totally deflated before
starting a new measurement. Stay still during mea-
surement.
2- If the problem occurs again, please contact our
customer service.
1- Check that the blood pressure monitor is correctly
positioned on your arm and that measurement is
performed in good conditions.
2-Low battery level. Unplug the blood pressure
monitor. Replace the alkaline cells.
3- If user has special characteristics, please contact
your physician.
4- If the problem occurs again, please contact our
customer service.
1- Low battery level. Unplug the blood pressure
monitor. Replace the alkaline cells.
2- If the problem occurs again, please contact our
customer service.
22