Briteq COB SLIM100-RGB Mode D'emploi page 10

ENGLISH
EFFECT MODE
Used to set the desired effect mode while used as master.
 Press the [MODE] button until the [EFF MODE] appears on the display.
 After 1 second, the last selected effect will start running. The name of the effect is now written on the
display
 Press the [ENTER] button: the values can be changed
 Use DOWN and UP buttons to selected the desired mode:
 [COL.CH07]
 [COL.CH03]
 [COL.FADE]
 Once the desired option is shown on the display you have to press the [ENTER] button to confirm.
 Use DOWN and UP buttons to select the desired playback speed from 01 (very slow) to 99 (fast).
 Once the correct value is shown on the display you have to press the [ENTER] button to confirm.
 Use DOWN and UP buttons to select the desired strobe speed from 00 (NO strobe) to 99 (fast).
 Once the correct value is shown on the display, press the ENTER button to save it.
STATIC COLOR MODE
Used to set the desired fixed color while used standalone without controller or as master in a
master/slave configuration : 9 preset colors + 1 custom color.
 Press the [MODE] button until [STATIC] is showinn on the display.
 Press the [ENTER] button: the values can be changed
 Use [DOWN] and [UP] buttons to selected the desired color:
 [COLOR WW]
 [COLOR CW]
 [RED]
 [ORANGE]
 [YELLOW]
 [GREEN]
 [CYAN]
 [BLUE]
 [PURPLE]
 [SET]
this is a color that can be set by the user. Follow these steps:
 Press the [ENTER] button: the display shows the value (000-255) for RED. (change with up/down
buttons)
 Press the [ENTER] button: the display shows the value (000-255) for GREEN. (change with
up/down buttons)
 Press the [ENTER] button: the display shows the value (000-255) for BLUE. (change with
up/down buttons)
 Press the [ENTER] button to save your setting.
MASTER DIM
Used to set the master dimmer while used as master.
 Press the [MODE] button until [MASTER] is shown on the display.
 Press the [ENTER] button: the values can be changed
 Use DOWN and UP buttons to select the desired level for the master dimmer. (please note that the last
selected static color will be used to set the value)
 Once you have the desired level, press the [ENTER] button to save it.
Note: the setting of this option has NO effect while the projector is used as SLAVE or in DMX-mode.
WHITE BALANCE
Used to set the white balance or to perfectly match the colors of several projectors.
 Press the [MODE] button until [WHITEBAL] is shown on the display.
 Press the [ENTER] button: the display shows the value (050-255) for RED. (change with up/down buttons)
 Press the [ENTER] button: the display shows the value (050-255) for GREEN. (change with up/down
buttons)
 Press the [ENTER] button: the display shows the value (050-255) for BLUE. (change with up/down
buttons)
 Once you have set the desired levels, press the [ENTER] button to save them.
Note: the setting of this option affects all color settings, static colors and DMX-controlled colors.
BRITEQ
®
(COLOR CHANGE 7) 7 colors change automatically without fading.
(COLOR CHANGE 3) red, green and blue change automatically without fading.
(COLOR FADE) colors change with a nice fading effect.
warm white 3200K
warm white 5600K
8/67
OPERATION MANUAL
COB SLIM100-RGB