Instructions For Use - Sony SU-600MD Instructions D'utilisation

English
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Symbols on the products
Consult the instructions for use
Follow the directions in the instructions for
use for parts of the unit on which this symbol
appears.
This symbol indicates the manufacturer, and
appears next to the manufacturer's name and
address.
This symbol indicates the European Community
representative, and appears next to the European
Community representative's name and address.
This symbol indicates the medical device in
the European Community.
This symbol indicates the serial number.
This symbol indicates the version of the
accompanying document.
This symbol indicates the date of
manufacture.
Storage and transport temperature
This symbol indicates the acceptable
temperature range for storage and transport
environments.
Storage and transport humidity
This symbol indicates the acceptable humidity
range for storage and transport environments.
Storage and transport pressure
This symbol indicates the acceptable
atmospheric pressure range for storage and
transport environments.
Caution
When you dispose of the unit or accessories, you must
obey the laws in the relative area or country and the
regulations in the relative hospital regarding
environmental pollution.
For the customers in Europe
This product has been manufactured by or on behalf of
Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan.
Inquiries to the EU Importer or related to product
compliance in Europe should be sent to the
manufacturer's authorized representative, Sony
Belgium, bijkantoor van Sony Europe B.V., Da
Vincilaan 7-D1, 1930 Zaventem, Belgium.
2
GB
Precaution
Caution
For cautions and further information on using this
product, refer to the Instructions for Use for the monitor.
Caution
Do not use the device in a MR (Magnetic Resonance)
environment.
It may cause a malfunction, fire, and unwanted movement.
Precaution
On Safety
• This is the stand for the Sony LCD monitor. For
confirming whether your monitor is compatible with this
unit, refer to the operating instructions of the monitor.
• When you raise the monitor, raise the lower side of the
monitor or the bottom of the stand.
• Clean the surface with a 50 to 70 v/v% concentration
of isopropyl alcohol or a 76.9 to 81.4 v/v%
concentration of ethanol using a swab method.
• Stubborn stains may be removed with a soft cloth such as a
cleaning cloth lightly dampened with mild detergent
solution using a swab method, and then cleaning using the
above chemical solution.
Never use solvents such as benzene or thinner, or acid,
alkaline or abrasive detergent, or a chemical cleaning cloth
for cleaning or disinfection, as they will damage the surface.
• Use the supplied screws for mounting. If you use
screws other than the supplied ones, the screws may
become loose and the device may fall causing injury.
Notes
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.