Human Touch Forti Mode D'emploi Et D'entretien page 5

get ready
ATTACH THE SEAT CUSHION
1. Lift the seat cushion side flap to expose the air hose,
place the seat cushion into position, then connect the
seat cushion air hose to the corresponding receptacle
on the chair.
2. Fold the lower seat cushion side flap down over
the hose connection, then secure it to the
seat cushion using the hook-and-loop fasteners.
3. Zip the thigh air bag on each side of the seat
cushion to the chair.
humantouch.com
Armrest
Seat cushion
Air hose
Side flap
Seat cushion
Zip
6
INSTALL THE SHOULDER PANELS
1. Place one of the shoulder panels into position,
aligning the shoulder panel tubes with the
corresponding receptacles on the chair.
2. Press the shoulder panel firmly until you hear a "click,"
indicating that the panel is locked into position.
3. Zip the shoulder panel flap to the chair.
4. Repeat steps 1 through 3 to install the other
shoulder panel.
PLACE THE HEAD PILLOW
Slide the head pillow flap underneath the
retaining strap, then position it as desired.
Shoulder panel
CLICK
Zip
Head pillow
Head pillow flap
7