Hozelock Green Power Mode D'emploi page 4

Start Up - First Use
Ensure the switch (D) is set to 'OFF' (Fig.2 item I).
Connect the GREEN POWER with an extension cable to the
power supply.
Hold the GREEN POWER by the handle and
(noting the above mentioned Safety Precautions) switch it on
to the "Heating" position (Fig.2 item J).
The device can take 45 seconds to reach operating
temperature.
To treat the weed, rest the nozzle on the ground placing
it directly above the weed and hold in that position for 3
seconds.
Weeds are killed by the thermal shock. The fast temperature
rise bursts the cells of the plant and destroys the weed.
Repeat this procedure to treat other weeds around the
garden.
Keep the electrical cable well away from the heated nozzle.
Cooling Cycle
Before switching off the device, a cooling phase is required.
If the cooling phase is not carried out, it may damage the
product over time.
Set the switch (D) to the "Cooling" position (Fig.2 item K) for
at least 30 seconds.
After this time, move the switch to OFF (Fig.2 item I) to switch
off the GREEN POWER.
Disconnect the device from the power supply.
Check the device is completely cold before storing it.
It can then be stored horizontally on the ground on its stand
(Fig.1 item C) or hung to the wall by its anchoring point
(Fig.1 item G).
Storage
Maintenance
The product can be cleaned with a damp cloth and mild
detergent but do not allow any water to enter the product.
There are no user serviceable parts on the GREEN POWER.
For any queries, please contact Hozelock Customer Services
at the below address.
Do not dispose of electrical appliances as unsorted municipal
waste, use separate collection facilities.
Contact your local government for information regarding
the collection systems available. If electrical appliances
are disposed of in landfills or dumps, hazardous substances
can leak into the groundwater and get into the food chain,
damaging your health and well-being. When replacing old
appliances with new ones, the retailer is legally obligated
to take back your old appliance for disposal at least free of
charge.
2 Year Guarantee
This product has a 2-years warranty against any material
or manufacturing defect, from the date of purchase of the
device by the user, upon presentation of the purchase invoice
or cashier receipt only. This warranty consists in repairing the
faulty device.
Our warranty excludes:
- unauthorized disassembly of the device,
- wear parts,
- modified equipment,
- equipment used against the recommendations described in
these instructions,
- equipment abused,
- degradations due to careless use: shock, drop...
Our warranty does not cover accidents resulting from the
damage or faulty and abnormal use of the equipment.
The legal warranty for conformity defects and redhibitory
vice applies according to the conditions of articles 1641 to
1649 of the French Civil Code.
Troubleshooting
Incidents Causes
The device No power
does not supply.
heat up.
The switch
(D) is not in
the heating
position.
The plant The device is
does not wilt. not held close
enough to
the weed.
The
application
time is not
long enough.
For any other issues, please call our Customer Services
department at the below address.
4
Disposal
Solutions
Check that the plug is
properly inserted into the
socket.
Check the fuse.
Set the switch (Fig.2 item J)
to the 'heating' position.
Apply the nozzle properly to
the weed while letting it rest
on the ground.
The application time of the
nozzle on the weed may
take longer than 3 seconds.
If necessary, repeat the
application.