Appendix; Technical Data - AgfaPhoto AS1150 Manuel D'utilisation

Appendix

EN

Technical Data

Type ........................ Color Contact Image Sensor (CIS)
Dimensions
Dimensions (L¦×¦H¦×¦W) ......................... 158¦×¦45¦×¦55¦mm
Weight
Weight............................................................................. 0,23¦kg
Input
Mains Connection
.............. Input: 100¦–¦240¦V¦~ (±¦10¦%) / 50¦–¦60¦Hz
Output
............................................................Output: 5¦V¦† / 1¦A
Power Consumption
Power Consumption
Operation
Operation............................................................................<¦9¦W
Recommended Ambient
Recommended Ambient.................................. 15¦–¦35¦ºC
Relative Humidity
Relative Humidity
......................................... 20¦–¦70¦% (non-condensing)
Scanner
Input format..................................................... 48 bit colour
Output format............................................................... 24-Bit
Maximum hardware resolution,
photos................................................................ 300¦×¦300 dpi
Maximum hardware resolution
film/slides....................................................1200¦×¦1200 dpi
Document Feed Slot
Maximum thickness of cheque
cards/plastic cards .......................................................1¦mm
Paper formats supported
Minimum (B¦×¦L) ................................................... 42¦×¦20¦mm
Maximum (B¦×¦L) ......................................... 105¦×¦304,8¦mm
Paper Weight ................................................. 50¦–¦105¦g/m2
Supported film formats
35mm colour negative film .......6 photos, unframed
35mm transparency slides .............................unframed
Film type detection (colour, B/W, slide) .. automatic
Computer Connection
Connection Type ....................................Compatible with
.........................................................USB 2.0 High Speed
Power supply
Model
Model No............................................ ADS-5N-06 05005G
Manufacturer
Manufacturer...............................................................................
.........SHENZHEN HONOR ELECTRONIC CO.,LTD.
Subject to Change
Technical specifications subject to change with-
out notice.
12
Spaltenumbruch
AgfaPhoto is used under license of Agfa-Ge-
vaert NV & Co. KG or Agfa-Gevaert NV. Neither
Agfa-Gevaert NV & Co KG nor Agfa-Gevaert NV
manufacture this product or provide any product
warranty or support.
For service, support and warranty information,
contact the distributor or manufacturer.
Contact:AgfaPhoto Holding GmbH,
www.agfaphoto.com
Manufacturer: Sagemcom,
www.sagemcom.com
The CE symbol confirms conformity with the EU di-
rectives that apply to the device.
Preservation of the environment as part of a sus-
tainable development logic is an essential concern
of AgfaPhoto. The desire of AgfaPhoto is to oper-
ate systems observing the environment. The de-
sire of AgfaPhoto is to operate systems observing
the environment and consequently it has decided
to integrate environmental performances in the
life cycle of this products, from manufacturing to
commissioning use and elimination.
Packaging: The presence of the logo (green dot)
means that a contribution is paid to an approved
national organisation to improve package recov-
ery and recycling infrastructures to facilitate.
Please respect the sorting rules set up locally for
this kind of waste.
Batteries:If your product contains batteries, they
must be disposed of at appropriate collection
points.
Product: The crossed-out waste bin stuck on the
product means that the product belongs to the
family of electrical and electronic equipment. In