Basic Features - YORKVILLE DJM806 Manuel De L'utilisateur

INTRODUCTION
Your new DJM806 Mixer/Amplifier is designed and built to provide long-term trouble free performance. Drawing
on thirty-five years of experience in the design and manufacturing of powered mixing consoles, Yorkville
engineers were able to optimize the design of the first high-powered DJ mixer. Features include rack-
mountability, quiet internal fan cooling, three microphone input-channels, three stereo input channels with dual,
switch-selectable pairs of inputs, removable interchangeable main crossfader and headphone crossfader, two
zones out, stereo balanced line outputs, headphone monitoring of both the cue and program buses, switchable
stereo 7-band EQ, level display assignable to Left/Right stereo operation or cue/program operation, 255-preset
digital signal processing, 800 watts of stereo power built-in, a selection of 1/4" and Speakon
TERMINOLOGY
•
3-pin microphone inputs are referred to as XLR connectors.
•
1/4" jack sockets are called phone connectors.
•
Balanced 1/4" inputs or outputs are called TRS or Tip-Ring-Sleeve
•
Master control and mixing channels are called buses.
•
Overload indicators are called CLIP LED's.
•
Patch cables with dual conductors plus shielding and Tip-Ring-Sleeve (stereo)
1/4" phone plugs are referred to as balanced patch cables.

BASIC FEATURES

•
CHANNELS 1 - 3 Balanced XLR & 1/4 " COMBINATION JACK
•
Balanced MIC inputs with low-noise input circuit design.
•
STEREO CHANNELS have Switchable Phono/Line stereo inputs
•
Three-band EQ with +15dB/-15dB of range for MIC channels.
•
Three-band EQ with +15dB/-20dB of range for STEREO channels.
•
Post-EQ, post-fader, EFX (effects) send controls.
•
Increased circuit headroom and gain for a more flexible mix.
•
Gold internal bus-interconnects for long life and maximum signal integrity.
•
Cue buttons and LEDs on all channels
•
Pulse-stretching CLIP LED's indicate even the briefest peaks and fire at -3dB,
well before the onset of actual clipping, at all active channel stages.
output connectors.
™