Belkin F5D9630-4 Manuel De L'utilisateur page 7

Knowing your Router
Back Panel
(6)
6. DSL Line
This port is for connection to your ADSL line. Connect your ADSL
line to this port.
7. Ethernet Ports
The Ethernet ports are RJ45, 10/100 auto-negotiation. The ports
are labeled 1 through 4. These ports correspond to the numbered
LEDs on the front of the Router. Connect your network-enabled
computers or any networking devices to one of these ports.
8. Reset Button
The "Reset" button is used in rare cases when the Router
may function improperly. Resetting the Router will restore the
Router's normal operation while maintaining the programmed
settings. You can also restore the factory default settings by
using the Reset button. Use the restore option in instances where
you may have forgotten your custom password.
a. Resetting the Router
Push and hold the Reset button for one second then release
it. When the Power/Ready light becomes solid again, the
reset is complete.
b. Restoring the Factory Defaults
Press and hold the Reset button for five seconds then
release it. When the Power/Ready light becomes solid again,
the restore is complete.
9. Power Plug
Connect the included 15V DC power supply to this inlet. Using
the wrong type of power adapter may cause damage to your
Router.
(7) (8)
5 5
(9)
1
2
3
4
5
6
7
8
9
10
12