Knowing Your Router - Belkin F5D9630-4 Manuel De L'utilisateur

Knowing your Router

The Router is designed to be placed on a desktop. All of the cables exit from
the rear of the Router for better organization and utility. The LED indicators
are easily visible on the front of the Router to provide you with information
about network activity and status.
Front Panel
1. Power LED
When you apply power to the Router or restart it, a short period of time
elapses while the Router boots up. When the Router has completely
booted up, the Power LED becomes a GREEN light, indicating the
Router is ready for use.
OFF
Green
Red
2. LAN Status LEDs
These LAN Status LEDs are labeled 1–4 and correspond to the
numbered ports on the rear of the Router. When a computer is properly
connected to one of the LAN ports on the rear of the Router, the LED
will light. Solid GREEN means a computer or a network-enabled device
is connected. When information is being sent over the port, the LED
blinks rapidly. ORANGE indicates a 10Base-T connection.
OFF
Orange
Orange - blinking
Green
Green - blinking
(1) (2)
Router is OFF
Router is ON
Router failed to start
No device is connected
Ethernet link is up and 10Base-T
device connected
When 10Base-T device transmitting
or receiving data
Ethernet link is up and 100Base-T
connected
When 100Base-T device
transmitting or receiving data
(5) (4) (3)
3 3
1
2
3
4
5
6
7
8
9
10
11
12