Dhcp Client List; Internet Wan - Belkin F5D9630-4 Manuel De L'utilisateur

Manually Configuring your Router Manually Configuring your Router

DHCP Client List

You can view a list of the computers (known as clients), which are
connected to your network. You are able to view the IP address
the computer, the host name
one), and the MAC address
Card (NIC). Pressing the "Refresh"
there have been any changes, the list will be updated.
(1)

Internet WAN

The "Internet WAN" tab is where you will set up your Router to connect
to your Internet Service Provider. The Router is capable of connecting
to virtually any ADSL Service Provider's system provided you have
correctly configured the Router's settings for your ISP's connection
type. Your connection settings are provided to you by your ISP. To
configure the Router with the settings that your ISP gave you, click
"Connection Type"
connection type you use. If your ISP gave you DNS settings, clicking
(2)
"DNS" allows you to enter DNS address entries for ISPs that require
specific settings.
When you have finished making settings, the "Internet Status" indicator
will read "Connection OK" if your Router is set up properly.
(1)
(2)
(2)
(if the computer has been assigned
(3)
of the computer's Network Interface
(2) (3)
(1)
on the left side of the screen. Select the
28 28
(4)
button will update the list. If
(1)
of
(4)