Operating procedures
w Communications with other store personnel (PAGE)
p
Store personnel wearing headsets can communicate with each other. The sound cannot be
heard at the order post.
When the Page-Lock mode is preset
1
Press the [P] button.
p ● A beep is heard from the earphone to confirm that communication has been
established. In this state, you can talk with a store personnel by speaking into the
microphone of this product.
2
Press the [P] button again.
p ● Communication is interrupted and the conversation is ended.
When the Press-To-Page (PTP) mode is preset
1
Hold down the [P] button.
p ● A beep is heard from the earphone to confirm that communication has been
established. In this state, you can talk with a store personnel by speaking into the
microphone of this product.
2
Release the [P] button.
p ● Communication is interrupted and the conversation is ended.
Note
p p The Page-Lock mode and the Press-To-Page (PTP) mode can be configured in the
setting mode. For further details, refer to pages 35 and 36.
p p Do not hold the microphone boom while communicating on this product. Doing so will
result in feedback, causing the order post, etc. to output abnormal sound.
20
WX-CH457P_PUQX1020ZAV1.indb
20
[P] button
2021/07/02
14:31:23