Installation - Glomex weBBoat 4G Plus Manuel D'installation Et D'utilisation

weBBoat 4G Plus
3.1

INSTALLATION

Installation on sailboats
It is advisable to place the weBBoat 4G Plus to a maximum height of 8/10
meters on the spreader with the support Glomex code ITM001 (not
supplied).
The weBBoat 4G Plus must be fixed to the support by tightening the screw
on the bottom of weBBoat 4G Plus with a screwdriver (Fig. 7).
IMPORTANT: Do not install the weBBoat 4G Plus at the masthead.
NO
WITH ITM001
OK
(OPTIONAL)
WITH ITM001
(OPTIONAL)
Fig. 6
GL00153
Fig. 7
GL00188
57