Basic Operations - Phonocar Phonocell 6/850 Manuel D'instructions

GB
4. Connection mobile phone – handsfree unit
1) Position handsfree-unit and mobile-phone at a maximum distance of 1 metre.
2) Keep handsfree-unit switched-off and press "MFB"-key for 5 seconds, until the
time the orange Led starts flashing.
3) Activate the Bluetooth-function on the mobile-phone and search for the
handsfree-unit. This procedure is described in your mobile-phone Instructions-
Manual.
4) Select " Phonocell Avantalk" from the Devices-List.
6) Insert code "0000" and press "OK" to connect the mobile-phone to the
handsfree-unit. Some mobile-phones are automatically connectable to handsfree-
units. It is advisable to "accept" the automatic connection to the handsfree-
unit, so that the connection-procedure needs not be repeated every time the
handsfree-unit is switched-on.
7) The connection-confirmation is announced by the vocal message "PHONE IS
READY FOR USE".
Once connected, the handsfree-unit will be in stand-by-mode, with the orange
Led flashing every 3 seconds.
The unit has an operation-field of 10 metres.
note: The handsfree-unit offers a connection waiting-time of 2 minutes. If
connection does not take place within such period, the procedure will have to be
repeated.

5. Basic Operations

5.1 Handsfree-Unit On/Off
Switch-on: keep "MFB"-key pressed for 3 seconds. The LED will turn orange.
(vocal message "POWER ON")
Switch-off: keep "MFB"-key pressed until LED turns off (vocal message "POWER
OFF")
note: to save energy, the handsfree-unit will automatically switch-off, every time
it remains unconnected for more than 10 minutes.
5.2 Answering the phone
Press "MFB"-key.
5.3 Refusing a phone-call
When it rings, keep the "MFB"-key pressed for 3 seconds. The vocal message
announcing the calling phone-number will be repeated for some seconds.
5.4 Repeating last phone-call
Press the "MFB"-key twice.
5.5 Interrupting phone-call
Press "MFB"-key briefly.
5.6a
8