Safety Regulations; Introduction; Symbols And Warning Notes; Information Symbols - Heiniger EVO 3 Traduction De La Notice Originale

NOTE!
Read these instructions carefully before starting operation.
1

Safety regulations

1.1

Introduction

y This chapter describes the safety regulations that are to be
taken into consideration as a matter of course when using the
shearing plant.
y All persons who carry out work on and with the shearing plant
must read the operating instructions.
y The operating instructions are to be kept in a secure place that
is accessible at all times.
y Authorised service agents may only carry out service and re-
pair work.
1.2

Symbols and warning notes

Various symbols are used in the operating instructions. These
symbols indicate possible hazards or bring to the user's attention
such technical information that, if not complied with, may lead to
personal injury and material damage or to uneconomic operation.
Hazard symbols
WARNING!
Denotes a possibly hazardous situation. Serious injury and even
death can result if such situations are not avoided.
CAUTION!
Denotes a possibly hazardous situation. Light or slight injury can
result if such situations are not avoided.

Information symbols

NOTE!
A note which, if not complied with, can lead to operational stop-
pages or damage.
2
EVO Shearing Plant – Translation of the original instructions