Environmental Protection And Waste Disposal; Introduction; Material Groups; Contact Address - Heiniger EVO 3 Traduction De La Notice Originale

Malfunction
Shearing unit is noisy or
vibrates.
Motor gets hot.
Shearing plant cannot
be switched off.
6

Environmental protection and waste disposal

6.1

Introduction

The operator bears the responsibility for disposing of the machine in the
proper manner. Observe the relevant regulations applicable in your country.
6.2

Material groups

Please hand this in to a service point or your local specialist electrical work-
shop when the machine is to be dismantled.
Material
Rubber
Polyamide PA
Polypropylene PP
POM
Polychloroprene/Polyester 17
Santoprene TPE
Iron/steel
Copper
Brass
Aluminium
other substances
Electronics
7

Contact address

The sales point or company specified on your guarantee certificate are
authorised service points, or, alternatively, refer to the nearest service point
in your area.
EVO Shearing Plant – Translation of the original instructions
Cause
The belt is slipping.
Bearing faulty.
Bearing faulty.
Ventilation screen dirty.
Malfunctions in the rigid
drive downtube / flexible
drive and / or shearing
handpiece.
Switch faulty.
contained in pos. X taken from Diag. 1
45
1/3/21/44/47/56
42
20/34
48
5/6/7/8/14/15/18/19/23/24/25/26/27/28/29/31/32/33/
35/37/39/40/41/46/52/53/54/55
45
38/43
16
2/4
11/12/13/22/38
Rectification
Have the belt replaced.
Have the bearing replaced.
Have the motor replaced.
Clean ventilation screen.
Have fault rectified.
Have the switch replaced.
13