Safety Regulations; Introduction; Symbols And Warning Notes - Heiniger Evo 3 Mode D'emploi

1 Safety regulations

1.1 Introduction

• This chapter describes the safety regulations that are to be taken
into consideration as a matter of course when using the shearing
plant.
• All persons who carry out work on and with the shearing
plant must read the operating instructions.
• The operating instructions are to be kept in a secure place
that is accessible at all times.
• Authorised service agents may only carry out service and repair
work.

1.2 Symbols and warning notes

Various symbols are used in the operating instructions. These symbols
indicate possible hazards or bring to the user's attention such techni-
cal information that, if not complied with, may lead to personal injury
and material damage or to uneconomic operation.
Hazard symbols
Warning
Denotes a possibly hazardous situation. Serious injury and even
death can result if such situations are not avoided.
Caution
Denotes a possibly hazardous situation. Light or slight injury can
result if such situations are not avoided.
Information symbols
Note
A note which, if not complied with, can lead to operational stoppages
or damage.
Diagram note
This symbol, complete with diagram number, denotes the correspon-
ding diagram at the end of the operating instructions.
EVO Shearing Plant – Instruction Manual 3