Lubrication - Kobalt XC302000 Manuel D'utilisation

ASSEMBLY INSTRUCTIONS

LUBRICATION

CAUTION
Inspect Before Use. Check for proper oil level
before operating!
See Figure 1 for location of oil sight glass and fill
port. Check oil sight glass for oil level as shown
in Figure 2. If oil needs to be added, fill with
compressor oil until oil level is to the middle of the
red dot.
OIL INFORMATION
Kobalt Air Compressor Oil
Kobalt Synthetic Blend Oil
Mobil 1 synthetic 10W30
®
Oil Capacity
Do not use regular automotive oil. Additives
in regular motor oil can cause valve deposits
and reduce pump life. For maximum pump
life, drain and replace oil after the first fifty (50)
hours of operation and then follow the regular
maintenance schedule outlined later
in the manual.
This pump has an oil sight glass as shown
in Figure 1. Oil level can be monitored and
maintained as shown in Figure 2.
SKU 221008
SKU 221009
15.2 ounces
10
1
Sight
Glass
Oil Drain
Plug
2
Sight Glass
Oil Fill Area
Full
Low