Assembly Instructions - Kobalt XC302000 Manuel D'utilisation

PREPARATION
Estimated Installation and Assembly Time: 20 minutes
Tools Required for Installation and Assembly (not included): Safety Glasses; Work Gloves; 9/16 in.
Socket and Ratchet; Adjustable Wrench
ADDITIONAL PARTS REQUIRED FOR USE [not included]:
1. Air Hose
2. Pipe Thread Sealant

ASSEMBLY INSTRUCTIONS

1. Unbolt the unit from the shipping skid. Use a
ratchet with a 9/16 in. socket. Remove the unit
from the skid. Discard shipping hardware once
removed.
2. Install rubber feet with nuts and washers.
Hardware Used
AA Nut
BB Rubber Foot
1
Shipping
Bracket
Shipping
Bolt
2
x2
x2
8
Shipping
Bolt
AA
BB