Maintenance; To Order - Chauvin Arnoux C.A 861 Notice De Fonctionnement

For maintenance, use only specified spare parts. The
!
manufacturer will not be held responsible for any accident
occuring following a repair done other than by its After Sales
Service or approved repairers.
6.1

Maintenance

6.1.1 Battery replacement
Select the OFF position on the switch
!
Take off the lid on the back of the instrument
Replace the worn-out battery with a 9 V battery (type 6LR61
or 6LF22)
6.2 Cleaning the casing
Clean using a cloth lightly dampened in soapy water. Rinse off
with a damp cloth.
!
Do not use solvent.
6.3 Metrological verification
It is essential that all measuring instruments are regularly
calibrated.
For checking and calibration of your instrument, please contact
our accredited laboratories (list on request) or the Chauvin
Arnoux subsidiary or Agent in your country.
6.4 Maintenance
Repairs under or out of guarantee: please return the product to
your distributor.
C.A 861 .............................................................. P01.6501.01.Z
C.A 863 .............................................................. P01.6502.01.Z
Comes with shock-proof surround, a 9 V battery, a sensor
(C.A 861) or two sensors (C.A 863) and this user's manual.
Spares:
9 V battery ............................................................ P01.1007.32
Accessories :
Refer to §. 5 Sensors
6. MAINTENANCE

7. TO ORDER

15