Central Processing Unit: Cpu; Important - MSI K9A2GM Guide D'utilisation

Central Processing Unit: CPU

The m ainboard supports AMD
Socket AM2/AM2+ for easy CPU installation. If you do not have the CPU cooler, consult
your dealer before turning on the com puter.
For the latest information about CPU, please visit http://global.m si.com.tw/index.php?
func=cpuform

Important

Overheating
Overheating will seriously damage the CPU and system. Always make sure the
cooling fan can work properly to protect the CPU from overheating. Make sure
that you apply an even layer of thermal paste (or thermal tape) between the CPU
and the heatsink to enhance heat dissipation.
Replacing the CPU
While replacing the CPU, always turn off the ATX power supply or unplug the
power supply's power cord from the grounded outlet first to ensure the safety of
CPU.
CPU Installation Procedures for Socket AM2/ AM2+
1. Please turn off the power and unplug the power cord be-
fore installing the CPU.
2. Pull the lever sideways away from the socket. Make sure to
raise the lever up to a 90-degree angle.
3. Look for the gold arrow of the CPU. The gold arrow should
point as shown in the picture. The CPU can only fit in the
correct orientation.
4. If the CPU is correctly installed, the pins should be com-
pletely em bedded into the soc ket and c an not be seen. Please note that any
violation of the correct installation procedures may cause perm anent dam ages to
your m ainboard.
5. Press the CPU down firmly into the socket and close the lever. As the CPU is likely to
move while the lever is being closed, always close the lever with your fingers press-
ing tightly on top of the CPU to m ake sure the CPU is properly and com pletely
em bedded into the socket.
®
processor. The mainboard uses a CPU socket called
Correct CPU
placement
Gold arrow
En-5