Extension Leads; Use Compliant To The Standards; Technical Specifications - Fox F28-182A Manuel D'instructions

EXTENSION LEADS

Only use three conductors extension cables, with a plug with two pins and a earthing contact, and sockets with two
holes and a earth corresponding to tool's plug. When using an electric tool at a remarkable distance from the
power supply, use an extension lead with adequate size to transport the necessary current to the tool. If the
extension lead has not a sufficient size a voltage drop can occur, causing a power loss and thus motor
overheating. Only use extension leads in compliance with CE standards.
Extension lead length:................................................................................................................................ up to 15 m
Cable size: ............................................................................................................................................... 3 x 2,5 mm²
Before using any kind of extension lead, check that it has not bare wires and that insulation is not cut or worn.
Repair and change immediately it if it is damaged or worn.
WARNING:
EXTENSION LEADS MUST BE ARRANGED AWAY FROM THE WORKING AREA IN ORDER
THAT THEY DO NOT COME IN CONTACT WITH THE WORKPIECES, THE TOOL OR OTHER
PARTS OF THE MACHINE, THUS CREATING POSSIBLE RISKS.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
This bandsaw has been designed for cross cutting and trimming wood and similar materials.
Maximum cutting height is 80 mm with the workbench placed at 0°.
The workbench can be tilted up to 45° to angle cut.
Round pieces must be cut only by using an adequate blocking device, and transversally to the longitudinal axis,
given that they could be rotated by the blade.
In case of cutting an angle on plane pieces, you must use a bloking square in order to guide the piece in a safe
way. Any other use is considered contrary to the prescriptions.
Motor power: ......................................................................................................................................................250 W
Voltage and frequency: ......................................................................................................................... 230 V – 50 Hz
IP protection:........................................................................................................................................................IP 40
Blade rotational speed: ............................................................................................................................... 900 m/min
Saw blade lenght: ......................................................................................................................................... 1400 mm
Maximum saw blade width:.............................................................................................................................. 6,5 mm
Goose neck:.................................................................................................................................................... 200 mm
Maximum cutting height at 90°: ........................................................................................................................ 80 mm
Maximum cutting height at 45°: ........................................................................................................................ 40 mm
Workbench angle: .................................................................................................................................. from 0° to 45°
Workbench size: ................................................................................................................................... 300 × 300 mm
Maximum workpiece size:............................................................................................................................ 400 × 400
Machine size: ...............................................................................................................................720× 350 × 275 mm
Net weight: ...................................................................................................................................................... 15.5 kg
EN

USE COMPLIANT TO THE STANDARDS

TECHNICAL SPECIFICATIONS

25