Safety Warnings - Senix GTC4QL-L Manuel De L'opérateur

SAFETY WARNINGS

1. Proper safety precautions must be observed. Like all
power equipment this unit must be handled carefully.
DO NOT EXPOSE YOURSELF OR OTHERS TO
DANGER. Follow these general rules. Do not permit
others to use this unit unless they are thoroughly
responsible and have read, and understood the string
trimmer manual and are trained in its operation.
2. Always wear safety goggles for eye protection. Dress
properly. Do not wear loose clothing or jewelry that
could become caught in moving parts of the unit.
Safe, sturdy, nonskid footwear should always be
worn. Always wear heavy, long pants, boots, gloves,
and a long-sleeve shirt. Do not wear loose clothing,
jewelry, short pants, sandals, or go barefoot. Secure
hair so it is above shoulder level. Long hair should
be tied back. It is recommended that legs and feet be
covered to protect from flying debris during operation.
3. Inspect the entire unit for loose parts (nuts, bolts,
screws, etc.) and any damage before start and
operation. Repair or replace as necessary before
using the machine.
4. Modifying your trimmer or installing non-Senix
attachments can make your trimmer unsafe. Non-
Senix attachments are usually designed for universal
applications. Although aftermarket attachments
may fit on your trimmer, they may not meet factory
specifications and could make your trimmer unsafe.
Do not remove the cutting head shield or modify
your trimmer in any way that would alter its design
or operation. This could make your trimmer unsafe.
Serious injury to the operator or bystanders could
result as well as damage to the machine.
5. Keep the handles free from oil and fuel.
6. Do not operate the unit in insufficient lighting
conditions.
7. Do not operate the unit when you are tired, when
your concentration is impaired and/or under the
influence of drugs, medication, or alcohol.
8. Always use proper handles when trimming.
9. Do not smoke while filling tank.
10. Do not fill fuel in an enclosed room or near open
flames. Ensure adequte ventilation.
11. Always store fuel in a properly marked container
that is approved by local codes and ordinances for
such usage.
12. Never remove the fuel tank cap while the engine is
running.
13. Never start or run the product inside a closed
room or building. Fumes from the exhaust contain
dangerous carbon monoxide.
14. Never attempt to make engine adjustments
while the unit is running. Always make engine
adjustments with the unit resting on a flat, clear
surface.
15. Do not use the unit if it is damaged or poorly
adjusted. Never remove the unit's guard. Serious
injury to the operator or bystanders could result as
well as damage to the machine.
16.Inspect the area to be cut and remove all debris that
could become entangled in the nylon cutting head.
Also remove any objects that the unit may throw
WWW.SENIXTOOLS.COM
during cutting.
17. Keep children away. Onlookers should be kept
at a safe distance from the work area, at least 15
METERS (50 FEET) away.
18. Never leave the unit unattended while the engine is
running.
19. The trimmer is designed to cut grass, weeds, and
brush. Other uses can result in injury to the operator
or damage to the trimmer and other property.
20. Do not overreach. Keep proper footing and balance
at all times. Do not use the unit while standing on a
ladder or on any other unstable footing location.
21. Keep hands and feet a safe distance from the nylon
cutting line while unit is in use.
22. Do not use this type of unit for sweeping away
debris.
23. Use nylon cutting head which is free of damage. If
a stone or any other obstacle is hit, stop the engine
and check the nylon cutting head. A broken or
unbalanced nylon cutting head must never be used.
24. FOLLOW INSTRUCTIONS for assembling and
operation.
25. Do not store the unit in a closed area where fuel
vapors can reach an open flame from hot water
heaters, furnaces, etc. Store in a locked, well
ventilated area only.
26. Ensure safe and proper performance of your unit.
Please only use original accessories. The use of
any other accessories or attachments may cause a
potential hazard or injury to the user, damage to the
unit, and void the warranty.
27. If the unit will not be used for a long time, clean
the unit completely, especially the fuel/oil tank, its
surroundings, and the air filter.
28. When refueling, stop the engine and confirm that
it is cooled down. Never refuel when the engine
is running or hot. When gasoline spills, be sure to
wipe it up completely and dispose of those materials
before starting the engine.
29. Stay clear of other workers or bystanders by at least
15 meters/50 feet.
30. Whenever approaching an operator of the unit,
carefully call their attention and confirm that the
operator stops the engine. Be careful not to startle
or distract the operator which can cause an unsafe
situation.
31. Never touch the nylon cutting head whenever the
engine is running. If it is necessary to adjust the
protector or nylon cutting head, make sure to stop
the engine and confirm that the nylon cutting head
has stopped running.
32. The engine should be turned off when the unit is
moved between work areas.
33. Be careful not to hit the nylon cutting head against
stones, or the ground. Unreasonable rough
operation will shorten the life of the unit as well as
create an unsafe environment for yourself and those
around you.
34. Pay attention to loosening and overheating
parts. If there is any abnormality of the unit, stop
operation immediately and check the unit carefully.
If necessary, have the unit serviced by customer
support. Never continue to operate a unit which
3