Table Des Matières; Safety - Senix GTSX5-M-0 Manuel D'instructions

TABLE OF CONTENTS
SAFETY..........................................................................................2
KNOW YOUR UNIT........................................................................6
SPECIFICATIONS*.........................................................................6
ASSEMBLY......................................................................................7
OPERATION..................................................................................10
MAINTENANCE............................................................................12
TROUBLESHOOTING..................................................................14
WARRANTY...................................................................................16
Signals an EXTREME hazard. Failure to obey a safety
DANGER symbol WILL result in serious injury or death
to yourself or to others.
Crude oil, gasoline, diesel fuel and other petroleum
products can expose you to chemicals including toluene
and benzene, which are known to the State of California
to cause cancer and birth defects or other reproductive
harm. These exposures can occur in and around oil
operations such as pipelines, marine terminals, tank
trucks and other facilities and equipment. For more
information go to:
www.P65Warnings.ca.gov/petroleum.
Signals a SERIOUS hazard. Failure to obey a safety
WARNING symbol CAN result in serious injury to
yourself or to others.
CAUTION:
Signals a MODERATE hazard. Failure to obey a safety
CAUTION symbol MAY result in property damage or
injury to yourself or to others.
NOTE: Advises you of information or instructions vital to
the operation or maintenance of the equipment.
This product contains a chemical known to the state
of California to cause cancer, birth defects or other
reproductive harm.
2

SAFETY

This operator's manual describes safety and
international symbols and pictographs that may appear
on this product. Read the operator's manual for
complete safety, assembly, operating and maintenance
and repair information.
SYMBOL NAME
Safety Alert
Read Operator's
Manual
Wear eye
and hearing
protection
Wear foot
protection
Wear gloves
MEANING
This graphic accompanied by the
words WARNING, DANGER OR
CAUTION calls attention to an act of a
condition which can lead to SERIOUS
INJURY.
Read the operator's manual(s)
and follow all warnings and safety
instructions. Failure to do so can result
in serious injury to the operator and/or
bystanders.
Always wear eye protection, ear
protection and head protection meeting
ANSI Z87.1 standards.
Wear foot protection.
Wear gloves.
Beware of foot injury by cutting
attachment.
attachments.
Never use without properly mounted
protection guard.
Keep 15 meters away from any other
person.
attachments.
Never use without properly mounted
protection guard.
Don't install or use any type of blade on
the unit displaying this symbol.
Power tools that are no longer usable
and defective or used battery packs/
batteries must be collected separately
and disposed of in an environmentally
correct manner.
Class II equipment (Charger).
Do not expose the product to rain or
wet conditions.
WWW.SENIXTOOLS.COM