Maintenance; Technical Data - A&D Medical UA-767 Plus BT-Ci Manuel D'instructions

Do not open the device. It uses delicate electrical components and an
intricate air unit that could be damaged. If you cannot fix the problem
using the troubleshooting instructions, request service from your dealer
or from the A&D service group. The A&D service group will provide
technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life.
However it is generally recommended to have the device inspected
every 2 years, to ensure proper functioning and accuracy. This
maintenance recommendation is for European customers only, to comply
with regulatory requirements. Routine inspection and maintenance is not
needed for non-European customers. Please contact either your
authorized dealer or A&D for maintenance.
Type
Measurement method
Measurement range
Measurement accuracy
Power supply
Number of measurements
Classification
Clinical test
EMC
Wireless communication
Operating conditions
Transport / Storage conditions -10°C to +60°C / 15%RH to 85 %RH
Dimensions
Weight
Applied part

Maintenance

Technical Data

UA-767PBT-Ci
Oscillometric measurement
Pressure: 20 - 280 mmHg
Pulse: 40 - 200 beats / minute
Pressure: ±3 mmHg
Pulse: ±5%
4 x 1.5V batteries (LR6, R6P or AA) or
AC adapter (TB-233) (Not included)
Approx. 450 measurements, when AA Alkaline
batteries are used, with pressure value of 180
mmHg at room temperature of 23°C
Internally powered ME equipment (Supplied by
batteries) /
Class II (Supplied by adapter)
According to ANSI / AAMI SP-10 1987
IEC 60601-1-2: 2007
WML-40AH (MITSUMI Electronics Co. Ltd.)
Bluetooth Ver.2.1 Class 1 HDP SSP
Continua certified
+10°C to +40°C / 15%RH to 85 %RH/
800 hPa to1060 hPa
Approx. 147 [W] x 64 [H] x 110 [D] mm
Approx. 300 g, excepting batteries
Cuff Type BF
English 17