dB Technologies VIO-L208 Caractéristiques Techniques page 54

English
• Fix the brakes on the DT-VIOL208 wheels.
• Remove the safety strap of the dolly.
• Insert the movable arms [6] into the brackets [4] as shown in the
• Insert the pins corresponding to the previously calculated angles inside the arms (for this operation,
you do not need to lift the modules).
• Carry out audio, RDNet and power supply re-link connections as described in the previous paragraphs.
To find the maximum number of power connections in a re-linked system, see the
SPECIFICATIONS section.
• Install the DRK-208 fly-bar on the upper module according to the settings checked with
DBTECHNOLOGIES COMPOSER.
• Lift the 4 modules anchored to DRK-208 using one or two engines and the appropriate means for
rigging (not provided).
• Disengage the brakes from the DT-VIOL208 wheels and put dolly back.
WARNING
DRK-208 ensures a loading capacity up to 260 kg / 573 lbs.
Any other configuration or information regarding the
system's data, such as the maximum capacity and hooking
points, must be verified prior to the installation using the
software dBTechnologies Composer (refer to the relevant
paragraph in this manual). It is available for free on the
website www.dbtechnologies.com under the DOWNLOADS
section.
VIO-L208
!
MECHANICS paragraph.
TECHNICAL
Cod. 420120268 REV. 1.0
53