2. Insert the front rounded glass (1) to the glass fittings (2a) on the front side of the
saladette and tighten the screws (2b).
3. Using a paper sealing tape attach the side glass (3) to the front glass (1).
4. Insert the second side glass (3) to the preassembled side glass fittings ( 2a) and
tighten the headless screws of glass fittings (2b).
5. Using a paper sealing tape attach the side glass (3) to the front glass (1).
6. Fix the angle glass connector (9a) to the front glass (1) with glass connecting
screws (9b) and integrated elements (9c).
7. Attach the lighting set (11) to side glasses (3) with the angle glass connector,
glass connecting screws and integrated elements (9a, b, c).
8. Place the upper glass (10) on the angle glass connector (9 a) and the lighting set
(11) and fix with the glass connecting screws (9b) and integrated elements (9c).
9. Mount the screws and nuts for glass support (4a, b) on both side glasses (3) and
place the glass shelf (8).
10. Connect the cable hose and the cable with the lighting set (11).
11. If necessary, place the sliding doors
service side.
5.1.3 Installation
Positioning
•
Place the device on a firm, dry, level and waterproof surface adapted to the impact
of high temperatures and sufficient load-bearing capacity for the weight of the
device including the entire contents.
•
Never place the device on flammable surfaces.
•
Do not place the device in the vicinity of an open flame, electric ovens, heating
stoves or other heat sources, such as direct sunlight. High temperatures may
adversely affect cooling performance and power consumption.
•
Place the device in such a way as to ensure proper circulation of air. Never cover
or block ventilation holes of the device.
•
Do not place the device in places with high humidity. Excessive moisture may
damage the device. Optimum working conditions of the device are in the ambient
temperatures between 10 ° C and 30 ° C and with relat ive humidity of 30-55%.
(
5, 6) in the pre-mounted rails (7) on the
- 35 -