Intended Use; Ec Declaration Of Conformity - Makita DFS250 Manuel D'instructions

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening Self drilling screw
capacities
Drywall screw
No load speed (RPM)
Overall length With short locator
With long locator
Overall length
Rated voltage
Standard battery cartridge
Charger
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model DFS250
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DFS251
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model DFS250
Work mode: screwdriving without impact
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
Model DFS251
Work mode: screwdriving without impact
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
BL1815 / BL1815N /
BL1820 / BL1820B
1.6 kg
) : 72 dB(A)
pA
) : 72 dB(A)
pA
2
or less
2
2
or less
2
DFS250
6 mm
5 mm
0 - 2,500 min
223 mm
239 mm
-
D.C. 18 V
BL1830 / BL1830B /
BL1840 / BL1840B /
BL1850 / BL1850B /
BL1860B
DC18RC / DC18RD / DC18SE / DC18SF / DC18SD
1.8 kg
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
The vibration emission during actual
WARNING:
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
Be sure to identify safety measures
WARNING:
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
4 ENGLISH
DFS251
-1
-
-
217 mm
BL1815 / BL1815N / BL1830 / BL1830B /
BL1820 / BL1820B BL1840 / BL1840B /
BL1850 / BL1850B /
1.5 kg
BL1860B
1.8 kg