MTD 19A30034000 Manuel De L'utilisateur page 10

Operation
Bagger Usage
NOTE: When both grass bags are full, place the
tractor on a firm, level surface, disengage the
PTO, turn the tractor engine off and set the
parking brake.
1. Flip Seat up.
2. Open the grass bag cover by pushing
in on the rear, right-side tab with your
right hand, as seen in 1 of Figure 5-1, and
lifting the cover with your left hand in the
center rear of the bagger cover, 2. Do not
remove the chute tube assembly from
the tractor.
2
Figure 5-1
3. Remove the grass bags by lifting these
up (1 in Figure 5-2) and moving the bags
away from the bag support assembly (2).
1
2
Figure 5-2
4. Empty the grass clippings at a proper
disposal sight, use the handle at the
bottom of each grass bag. Holding the
bag firmly, empty the contents
10
5. Replace the grass bags in the reverse
order and in the same orientation in
which they were removed, close the lid,
pivot the seat down, restart your tractor
and resume cutting your grass.
6. Retighten all wing knobs periodically
throughout the season and check that
all springs, clips, and straps are tight and
secure.
1
5