Tools Necessary For The Installation Of Pump Up20T; Pump Up20 T Installation - Ultraflex UP 20 F Manuel D'installation Et D'entretien

ULTRAFLEX

3.3 Tools necessary for the installation of pump UP20T

Open end
wrench
13 mm

3.4 Pump UP20 T installation

NOTICE
The tilt X52 mechanism is supplied separately.
1 Select a suitable place for the steering
station. Make sure that there is enough
manoeuvering space for the steering wheel and
for the steering pump and its pipes and fittings.
2 Remove the plugs (1) from the pump (2) by using a
screwdriver.
3 Fix the bracket (3) supplied with tilt X52 to the
dashboard (4) by following the instructions
enclosed to tilt X52.
* The tools to assemble tilt X52 are listed
in the manual enclosed to tilt X52.
Screwdriver
1
4
PUMP FOR HYDRAULIC SYSTEMS
Installation and maintenance manual
min. 255 mm [10,03 in.]
2
1
3
page 13
- of 71