Ultraflex UP 20 F Manuel D'installation Et D'entretien page 15

ULTRAFLEX
6 Align and insert the tilt universal joint into
the pump shaft by loosening about 1-1.5 turns
the screws (8) on the universal joint itself always
according to the procedure described in the
installation manual supplied with tilt X52.
Retighten the screws (8) (small screw torque of
3 Nm - 26 lbs in, big screw torque of 7,5 Nm -
68 lbs in) and fix the tilt with screws (9) (torque
of 5 Nm - 44 lbs in).
NOTICE
The kit F ULTRAFLEX supplied separately (see the corresponding instructions) can be used on pump UP20 T
to simplify the hydraulic system filling and purging.
Installation and maintenance manual
8
9
PUMP FOR HYDRAULIC SYSTEMS
9
8
9
page 15
- of 71