Signs And Symbols; Notes; Safety Notes - Beurer TL 41 Mode D'emploi

2. Signs and symbols

The following symbols appear in these instructions or on the device.
Read the instructions of use
Warning instruction indicating a risk of
injury or damage to health
Warning
Safety note indicating possible damage
to the unit/accessory
Important
Serial number
The CE labelling certifies that the
product complies with the essential
requirements of Directive 93/42/EEC on
medical products
IP 21
Protected against solid foreign objects
12.5 mm in diameter and larger, and
against vertically falling drops of water
Storage
Permissible storage temperature and
humidity

3. Notes

Please read these instructions for use carefully and keep them for later use. Be sure to make them accessible to
other users and observe the information they contain.

Safety notes

Warning
• The daylight therapy lamp is only intended for radiation on human bodies.
• The device is not intended for commercial or clinical use; it is designed exclusively for personal use at home.
• The device is suitable for health applications at home. No special training is required to use the device.
• Before use, ensure that there is no visible damage to the device or accessories and that all packaging
material has been removed. If you have any doubts, do not use the device and contact your retailer or the
specified Customer Service address.
• Ensure that the daylight therapy lamp is positioned on a stable base.
• The device must only be connected to the mains voltage that is specified on the type plate.
• Never submerge the device in water or other liquids and do not use it in the bathroom.
• It must not be used on people with disabilities, children under 3 years of age or people with reduced sensitivity
to heat (e.g. people with skin alternations due to illness), after taking pain relief medication, alcohol or drugs.
• Keep packaging material away from children (risk of suffocation!).
• Do not allow children to play with the device.
• If the device is warm, do not cover it or pack and store it.
• Always unplug the mains part and allow the device to cool down before touching it.
• Do not touch the device with wet hands when it is plugged in and do not allow water to spray on the de-
vice. Only operate the device if it is completely dry.
• Ensure that you only insert and remove the mains part with dry hands and that you only press the ON/OFF
button with dry hands.
• Keep the mains cable away from hot objects and naked flames.
• Protect the device from heavy impact.
• Do not pull the mains part out of the socket using the mains cable. Hold the mains part directly when
pulling the mains part from the socket.
Permissible operating temperature
Operating
and humidity
Note on important information
Note
Manufacturer
Device in protection class 2
O/I
OFF / ON
Dispose of packaging in an environ-
20
mentally friendly manner
PAP
11