Axis T92E Serie Guide D'installation page 3

Safeguards
Please read through this User's Guide carefully before installing the product. Keep the User's Guide for further
reference.
CAUTION!
Always use a shielded network cable (STP) between the camera and the end point and ensure that
•
the shield of the cable is connected to the protective earthing at the end point. Installations of Axis
cameras using a shielded network cable (STP) and a properly earthed end point have been tested to
comply with industry immunity standards' levels such as surge protection. Any other installation
method will void the warranty and leave the unit at a risk.
• When transporting the Axis product, use the original packaging or equivalent to prevent damage to the
product.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to vibration, shocks or heavy pressure and do not install the camera on
unstable brackets, unstable or vibrating surfaces or walls, since this could cause damage to the product.
• Only use handtools when installing the Axis product, the use of electrical tools or excessive force could
cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.
• Only use accessories and spare parts provided or recommended by Axis.
• Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for service matters.
IMPORTANT!
• This Axis product must be used in compliance with local laws and regulations.