Axis T92E Serie Guide D'installation page 11

AXIS T92E05/T92E20 Installation Guide
7. If applicable, check that the Status LEDs indicate the correct conditions. See table on page 13
for further details. Note that the Status LED can be configured to be unlit during normal
operation.
8. Loosen the bracket adjustment screw to aim the camera to the point of interest and focus the
camera according to the instructions in the Installation Guide provided with the camera.
9. Take the top cover and attach the safety wire to the tab on the bottom cover.
Alarm output
Example image: AXIS T92E20 Outdoor Housing
Bottom cover
Network connector (PoE OUT)
Cable holes
Network connector (PoE IN)
LED indicator
Cold Startup Delay switch
(see text below)
Page 11