C-H4K User Interface (Ui) And Its Functions - Optika Italy H Serie Manuel D'instructions

6.

C-H4K User Interface (UI) and its Functions

The C-H4K UI shown in Fig. 6 includes a Camera Control Panel on the left side of the video window, a Meas-
urement Toolbar on the upper side of the video window, a Camera Control Toolbar on the bottom of the video
window.
1. Move the mouse cursor to the left side of the video window: the Camera Control Panel will pop up automati-
cally.
2. Move the mouse cursor to the upper side of the video window: a Measurement Toolbar will pop up for the
calibration and measurement operations.
• When user left-clicks the Float/Fixed button
fixed. In this case the Camera Control Panel will not pop up automatically even if users move mouse cursor
to left side of the video windows.
• Only when user left-clicks the
be possible to perform other operations on the Camera Control Panel, or Camera Control Toolbar.
• During the measuring process, when a specific measuring object is selected an Object Location & Attributes
Control Bar
3. Move the mouse cursor to the bottom of the video window, the Camera Control Toolbar will pop up automati-
cally.
Figure 6 - Camera Control User Interface
on the Measurement Toolbar, the Measurement Toolbar will be
button on the Measurement Toolbar to exit from measuring procedure it will
will appear for changing location and properties of the selected objects.
Page 12