Optika Italy H Serie Manuel D'instructions page 9

5.2.5 Connecting multi-cameras to a router via GE port/WLAN for network application
In LAN/WLAN STA mode, the camera connects to router LAN/WLAN by GE Ethernet cable/WLAN STA mode.
If a router with GE/WLAN capability is used, users could connect the router with Ethernet cable/WLAN and con-
trol the camera.
1. When connecting via LAN the connection and configuration are just the same as in Sec.5.2.3, but here, users
need to check DHCP.
• If Multicast is disabled or is not supported, users should only select Unicast.
• If Multicast is supported by the network, users could select Multicast to achieve a better performance, espe-
cially in the case that multi-users connect to the same camera.
• In addition, please guarantee that the broadcasting function is enabled in the network.
Figure 5 - LAN configuration
Page 9