Setting > Network > Wlan; Setting > Measurement - Optika Italy H Serie Manuel D'instructions

6.3.3 Setting > Network > WLAN
WiFi Mode
Channel/SSID
Password
6.3.4 Setting > Measurement
This page is used for the definition of the Measurement Object properties
Used for setting digits behind the decimal point for measurement results.
Global:
Calibration Line Width
.
Color
EndPoint
Point, Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circle, Ellipse, Annulus, Two Circles, Polygon,
Curve
Left-click the beside the measuring patterns mentioned above will unfold the corresponding attribute settings
to set the individual property of the measuring object.
Figure 11 - WLAN Network Setting Page
AP/STA mode to select.
Channel for the AP mode and SSID for the STA mode. Here, the SSID is the router's
SSID.
Camera Password for the AP mode. Router Password for the STA mode.
Figure 12 - Measurement Page
Used for defining width of the lines for calibration.
Used for defining color of the lines for calibration.
Used for defining shape of the endpoints of lines for calibration.
Type:
Means no endpoints.
Null:
Rectangle: Means rectangle type of endpoints. It makes alignment more easily.
Page 18