C-Hp4 User Interface (Ui) And Its Functions - Optika Italy H Serie Manuel D'utilisation

6.

C-HP4 User Interface (UI) and its Functions

The C-HP4 UI shown in Fig. 2 includes a Camera Control Panel on the left side of the video window, a Measurement Tool-
bar on the upper side of the video window, a Camera Control Toolbar on the bottom of the video window.
1. Move the mouse cursor to the left side of the video window: the Camera Control Panel will pop up automatically.
2. Move the mouse cursor to the upper side of the video window: a Measurement Toolbar will pop up for the calibration
and measurement operations.
• When user left-clicks the Float/Fixed button
this case the Camera Control Panel will not pop up automatically even if users move mouse cursor to left side of the
video windows.
• Only when user left-clicks the
ble to perform other operations on the Camera Control Panel, or Camera Control Toolbar.
• During the measuring process, when a specific measuring object is selected an Object Location & Attributes Control Bar
will appear for changing location and properties of the selected objects.
3. Move the mouse cursor to the bottom of the video window, the Camera Control Toolbar will pop up automatically.
Figure 2 - Camera Control User Interface
on the Measurement Toolbar, the Measurement Toolbar will be fixed. In
button on the Measurement Toolbar to exit from measuring procedure it will be possi-
Page 6