Optika Italy H Serie Manuel D'instructions page 11

4. Finally as shown below, 2 HDMI cameras are connected to the router with GE cable and 2 HDMI cameras
are connected to the same router with WLAN STA mode (the number of the cameras, the connection mode
(GE or WLAN STA)) connected to the router are determined by the router performance).
5. Make sure that your PC or your mobile device is connected to the LAN or WLAN of the router.
6. Start the ProView / LiteView software or the mobile App and check the configuration. Normally, active cam-
eras are automatically recognized. The live image of each camera is displayed.
7. For the display, the Camera List tool window is used in the ProView/LiteView software, and the Camera
Thumbnail is used in the mobile App.
• Note on data security
The data transfer of the HDMI 4K camera in LAN or WLAN is not encrypted. Anyone who is connected to the
network and has installed the Optika software or mobile App, can see the live image of all active cameras.
Operate the camera with the ProView software, if you want to make sure that nobody in the network can see the
camera's live image.
• About the routers/switches
It is suggested that routers/switches supporting 802.11ac 5G segment should be selected to achieve better wire-
less connection experience.
Page 11