Quick Start; Device Overview - Klarstein WINDWAKER ECO Manuel D'instructions

EN
66

QUICK START

1 After plugging the indoor air conditioner power plug into the wall outlet, press the
POWER button on the remote control to turn on the indoor air conditioner.
2 Press the MODE button to set the desired mode: AUTO, COOL, DRY, FAN, HEAT.
3 Press the ARROW KEYS to set the desired temperature (the temperature cannot be
adjusted in automatic mode).
4 Press the FAN key to set the fan speed:
auto > low > low-medium > medium > medium-high > high.
5 Press the buttons to set the air discharge angle.
SWING

DEVICE OVERVIEW

Indoor Unit
Display
Temp. indicator
Receiver
window
Note: Actual product may be different from above graphics, please refer to actual
products.
Air inlet
Panel
Filter
Emergency button
Horizontal
louver
Air outlet
Power indicator
Display