Pause; Stopping The Robot - Amibot vision Manuel D'utilisation

EN
Operation
HOME mode
audio message.
home base once it has completed its cleaning cycle (the time
it needs to search depends on the distance between the
home base and if there are any obstacles along its route).

Pause

To pause the robot, press the AUTO button on the robot or press
"Pause".
NOTE: After a few minutes, the robot automatically returns to its home base. If the
home base is not plugged in, the robot switches to standby after a several minutes.
It can be switched back on at any time by pressing the AUTO button or from the
mobile app. Press the desired cleaning mode button a second time to reactivate its
cycle.

Stopping the robot

When the robot finishes its cleaning cycle, it goes back to its home
base. To manually stop the robot, press the AUTO button or press
"Pause", then within modes, select "Back to home base".
If you need to charge the robot at any time
while in use, you can do so by pressing the
"HOME" button.
The HOME
yellow and
a "Returning
The robot will automatically go back to
24
indicator light
the robot
to charging
flashes
emits
station"