Timer Operation - Zibro S1731 Manuel D'utilisation

man_S17xx.qxd 12-03-2009
Swing of air flow (horizontallay)
If the louver button is pressed once, the horizontal louver will move within the range of the figure above.
Fixing the air flow Direction
If the louver button switch is pressed again, the horizontal louver will be fixed and that position is memo-
rized. From the next operation the louver will be set at previous position automatically.
Vertical adjustment
Swing of Air Flow (vertically)
The vertical airflow can be adjusted by manually changing the vertical louver blades.
For S1753 only: the vertical louver will keep moving steadily right and left if the vertical louverbutton is pres-
sed once.
Fixing the flow direction:
For S1753 only: The horizontal louver will come to a halt if the vertical louver button is pressed once again.
NOTE!
• When the operation is off, the horizontal louver closes the outlet automatically.
• Do not move the horizontal louver by hands. It may make the louver not to work correctly. In
order to move the vertical louver, use wireless remote controller without fail. In case the louver
does not work correctly, once stop the operation and turn on again.
• During in cooling or dry operation, the horizontal louver should not be downward for long
time.

Timer operation

Before setting the timer, confirm that the present time is set accurately. Once you set the timer, the remote
controller memorizes the setting. From the next time, you can operate the same timer mode just by pres-
sing the ON/OFF button and the Timer fixing ("ON/OFF Timer") button.
You can use the combined function of the "ON Timer" and "OFF Timer".
12:33 Pagina 33
4
33