Temperature Indication - Zibro S1731 Manuel D'utilisation

man_S17xx.qxd 12-03-2009
Remote Control
S1731 - S1735
S1753
NOTE
• 00:00 A.M. – 12:00 A.M. = 00:00 – 12:00
• 00:00 P.M. – 12:00 P.M. = 12:00 – 24:00
12:33 Pagina 27
TRANSMITTER
Sends signals to the receiver of the indoor
unit.
FAN SPEED
INDICATION
Indicates the fan speed selected by the fan
speed button. When set at "AUTO", the fan
speed changes automatically according to
the difference between the designated tem-
perature and the room temperature.
OPERATION MODE
INDICATION
Indicates the current operating mode
TIME DISPLAY
Indicates the present time or the timer.
TIMER MODE
INDICATOR
ON: The air conditioner starts operation at
the designated time.
OFF: The air conditioner stops operation at
the designated time.
TEMPERATURE
INDICATION
Indicates the temperature set by the tempe-
rature setting buttons.
TRANSMITTING
INDICATION
Lights up when a signal is sent.
TEMPERATURE
SETTING BUTTONS
The setting temperature increases
by 1°C (1.8°F) per press.
The setting temperature decreases
by 1°C (1.8°F) per press.
Holding a button changes the temperature
setting quickly.
LOUVER BUTTON
Air flow direction can be changed horizontal-
ly (upward and downward) by each press.
VERTICAL LOUVER
BUTTON (S1753)
Air flow direction can be changed vertically
with swing movement (right and left) by
each press.
IONIZER BUTTON
(S1731 - S1735)
Generates negative ions. For the inverter
models only, the power indicator lights up
red.
FAN SPEED BUTTON
Use to adjust the fan speed. The indication
of the fa speed varies among "L" (Low),
"M" (Medium), "H" (High), and "AUTO"
each time the button is pressed.
OPERATION MODE
BUTTON
Use to change the operating mode. The
indication of the operating mode varies
among (Automatic), (Cooling),
(Dry), (Circulating) and
(Heating) each time the button is
pressed.*
TIME ADJ BUTTON
Press the "TIME ADJ" button to adjust the
present time or the timer.
, BUTTONS
Press these buttons to adjust the present
time or the timer.
Forward time
Backward time
Holding a button changes the time setting
in 10-minute intervals.
TIMER FIXING
BUTTONS
Press these buttons to turn the timer ON or
OFF.
SLEEP BUTTON
Press this button for the Sleep setting.
ON/OFF BUTTON
Starts operation with a press: stops opera-
tion with the next press.
4
27