Instructions For Use - Zibro S1731 Manuel D'utilisation

man_S17xx.qxd 12-03-2009
3 in 1
filter
D

INSTRUCTIONS FOR USE

Present time setting
Example: Set to 3:50 p.m.
Circulation operation
12:33 Pagina 29
a. Open the front panel by pulling upward
b. Attach the 3 in 1 filter behind the stopper so that the "FRONT" indication is
showing outward. Make sure that the filters are completely behind the stop-
pers. If the filters are not attached correctly, it may cause defects.
c. Close the front panel by pushing downward.
1. Press the "TIME ADJ" button once
2. Adjust the time with "+", "-" buttons. Holding a button changes time set-
ting in 10-minute intervals.
3. Press the "TIME ADJ" button 3 times. The present time appears on the dis-
play. The setting is complete.
NOTE
Even if the actual time is not programmed, you can use all operations
except "Timer operation"
When you use other heating equipment, heated air accumulates in the upper
space of the room. Using the operation "Circulation" will equalize the differences
between the upper and lower spaces of the room and improves the efficiency of
your heating equipment.
4
29